How to Debug the Bowl Hydraulic Press?

The Procedure for Debugging the Bowl Hydraulic Press Is as Follows:

Preparation: Confirm Whether the Hydraulic System, Electrical System and All Parts of the Machine Work Normally, Whether the Hydraulic Oil Is Sufficient, and Clean up the Machine and Working Area.

Install and Adjust the Upper and Lower Molds: Select the Appropriate Upper and Lower Molds as Needed and Install Them on the Hydraulic Press. Adjust the Mold Height, Levelness and Installation Fastening Degree to Ensure That the Mold Is Well Assembled.

Adjust the Machine: According to the Processing Requirements and Workpiece Size, Adjust the Parameters of the Machine, Such as Stroke, Pressure, Speed, Etc., to Ensure That the Machine Can Work Normally and Meet the Processing Requirements.

Start Processing: Start the Machine, Let It Run Automatically, Or Manually Control the Machine for Processing. During the Processing Process, Observe the Running Status of the Machine and Pay Attention to Whether There Are Abnormal Situations, Such as Abnormal Noise and Leakage.

Adjust the Mold: According to the Actual Situation in the Processing Process, Fine-Tune the Mold to Ensure the Processing Quality and Processing Efficiency.

Stop: When the Processing Is Completed, Stop the Machine and Press the Stop Button to Close the Hydraulic System.

Unload the Workpiece: Remove the Workpiece from the Workbench and Clean the Working Area.

Maintenance: Regularly Check Whether All Parts of the Machine Work Normally, Keep the Hydraulic System Clean and Lubricated, Replace the Hydraulic Oil in Time, and Maintain the Hydraulic Cylinder, Etc.

In a Word, the Debugging of the Bowl Hydraulic Press Should Pay Attention to Safety, Abide by the Operating Procedures, Understand the Machine Performance and Processing Requirements, Ensure the Normal Operation of the Machine, and Carry out Necessary Maintenance. If You Are Not Familiar with the Operation, We Recommend That You Ask Professional Technicians to Perform the Operation.

• Pre：What Is Double Station 2000 Tons Graphite Crucible Hydraulic Press? How Much Is One
• Next：What Is Graphite Bowl, Lithium Iron Phosphate Graphite Bowl and Graphite Box?