Time:2023-11-30 14:19:33 Browse: 120
Railway Bridge Tunnel Rubber Slag Stop Plate, also known as rubber bridge walkway plate, is equipped with a reinforced steel frame, which has strong load-bearing capacity, is not easily deformed, and is earthquake-resistant, stable, and non-slip. With the comprehensive construction of large railway lines in China, the tracks above are for our high-speed trains such as the Harmony, and the tracks below are supplied by Sanmen County Yucai Rubber Factory for your rubber walkway plates, ensuring your safe and joyful travel.
The bridge lightweight rubber walkway plate is mainly made of natural rubber, with an internal threaded steel frame, and is formed by high-temperature and high-pressure molding. The surface is designed with a concave-convex pattern, making it an ideal product to replace reinforced concrete walkway plates. For the hot-pressed rubber bridge walkway plate, it is necessary to choose a hydraulic press with an appropriate tonnage, called a 315-ton railway bridge lightweight rubber walkway plate molding hydraulic press. The equipment adopts a three-beam four-column dual-cylinder structure design, using a four-column structure, the moving plate is parallel to the working surface with high precision, and four guide sleeves ensure high vertical accuracy; the oil cylinder adopts an adjustable design; the upper pressing plate movement mechanism is composed of an oil cylinder, linear bearing, 4 column guide rod, mold, etc.
Features of the 315-ton railway bridge lightweight rubber walkway plate molding hydraulic press:
The 315-ton railway bridge lightweight rubber walkway plate molding hydraulic press adopts a four-column three-plate structure, with upper and lower plates for heating control, a large output of 315 tons, a stroke of 800mm (adjustable to 1000mm), a working height of 700mm, and a working area of 1000*1000mm.
The hydraulic system adopts time control, and the output can be adjusted according to the product requirements.
The 315-ton railway bridge lightweight rubber walkway plate molding hydraulic press has a two-hand start button, emergency stop button, and up-down die inching operation button, which is convenient for mold installation and calibration.
The 315-ton railway bridge lightweight rubber walkway plate molding hydraulic press is divided into manual/automatic operations. To start the machine: in manual mode, press the up and down buttons, and the machine will inch up and down for product trial pressing to meet the product requirements. In automatic mode, press the start button with both hands. The machine quickly presses down, stops quickly after the product reaches the set time, and quickly returns. One cycle is completed.
In addition to the 315-ton hydraulic press for hot molding railway bridge lightweight rubber walkway plates, the company can tailor suitable bridge lightweight rubber walkway plates according to the characteristics of the products, including 400-ton, 500-ton, 630-ton, 800-ton, and other four-column hydraulic presses or frame hydraulic presses. The equipment mostly adopts a four-column three-plate structure, with precise guide sleeve control, high parallel and vertical accuracy between the moving plate and the worktable surface; the upper and lower work surfaces are equipped with heat-treated heating plates, fixed with universal T-slot molds, and controlled by an intelligent temperature controller with high precision and small temperature error. The process adjustment is simple: pressure, stroke, speed, holding time, and closing height can be adjusted arbitrarily according to the production process, making operation simple.
This is the message content area, you can enter or display the message here
