Blog

Quick Troubleshooting of Electrical Failures in Tensile Hydraulic Press

Quick Troubleshooting of Electrical Failures in Tensile Hydraulic Press:I. Inspection of Buttons:First, disconnect the power supply. Use a multimeter in resistance mode to check fo...

2023-12-21

Reasons for Malfunction in the Speed Control System of a 1000-ton Hydraulic Press

Reasons for Malfunction in the Speed Control System of a 1000-ton Hydraulic Press:1.The throttle valve has a blocked throttle port, leading to either insufficient flow or unstable ...

2023-12-21

Prolonging the Service Life of the Hydraulic Cylinder in Stretching Hydraulic Press

The hydraulic cylinder is a commonly used actuator in stretching hydraulic presses, and it is also a component prone to damage. How to extend the service life of the hydraulic cyli...

2023-12-20

Causes of Temperature Rise in Hydraulic Stretching Machine

1. Insufficient Oil Tank Volume and Inadequate Cooling:The oil tank has a small volume, resulting in insufficient heat dissipation area. Either no oil temperature cooling device is...

2023-12-19

Causes and Solutions for Piston Slipping or Crawling in Automotive Interior Hydraulic Press

(1) Internal Sticking of Hydraulic Cylinder:Incorrect assembly, deformation, wear, or exceeding positional tolerances of components inside the hydraulic cylinder may lead to excess...

2023-12-19

Wear and Tear Caused by Long-Term Operation of the Forming Hydraulic Press

Precautions for Starting the Hydraulic Pump Motor of the 200-Ton Four-Column Hydraulic Press:1.Before starting, it is essential to fill the hydraulic pump with clean hydraulic oil ...

2023-12-19