How to Adjust the Size of a Shearing Machine

Shearing machines are used in various industries to cut metal sheets of different sizes.  To achieve accurate and precise cuts, it is important to adjust the size of the shearing machine according to the specific requirements of the project.  In this article, we will discuss how to adjust the size of a shearing machine. 

Adjusting the Blade Clearance: To adjust the size of the shearing machine, the blade clearance needs to be adjusted.  This keeps the machinery running smoothly and ensures that the cuts are precise. 

The blade clearance is the distance between the upper blade and the lower blade.  This distance should be adjusted according to the thickness of the sheet being cut.  If the blade clearance is too small, it can result in poor cutting quality and damage the blades.  If the clearance is too large, it can cause a loss of cutting pressure and affect the accuracy of the cut. 

To adjust the blade clearance, loosen the bolts holding the upper blade on the shearing machine.  Place a feeler gauge between the upper and lower blades to measure the distance.  Use the adjustment screws to increase or decrease the blade clearance.  Once the correct clearance is achieved, tighten the bolts holding the upper blade onto the shearing machine. 

Adjusting the Backgauge: The backgauge is another important component of the shearing machine that needs to be properly adjusted according to the sheet size.  The backgauge is the stationary stop that positions the sheet for cutting. 

To adjust the backgauge, loosen the lock nuts on the adjustment screws and move the gauge to the desired position.  Lock the nuts on the adjustment screws into place to maintain the backgauge position. 

Testing the Settings: After adjustments are made to the blade clearance and backgauge, test the settings by cutting a test piece of the sheet metal.  Verify that the piece is cut accurately and precisely according to the desired size. 

Conclusion: Adjusting the size of a shearing machine is necessary to ensure accurate and precise cuts.  The blade clearance and backgauge both need to be adjusted according to the thickness and size of the sheet metal being cut.  Regular maintenance and adjustments of the shearing machine are important to maintain its optimal performance and efficiency.

• Pre：Safety Rules and Regulations for Operating a Shearing Machine
• Next：Nadun 6X2500 guillotine shearing machine for 6mm thickness sheet metal cutting