Time:2023-03-31 09:23:03 Browse: 120
Because the Cold Extrusion Process Has the Advantages of Saving Raw Materials, Improving Productivity, Reducing the Cutting Processing Volume of Parts, and Replacing High-quality Materials with Poor Materials, Many Auto Parts and Accessories Are Currently Available, most of the Things Used in Electronic Products and Electric Tools Are Formed by Hydraulic Press Cold Extrusion. So How Did Hydraulic Press Complete the Pressing and Forming Process of Aluminum Products?
1. before Starting the Machine, Check Whether the Oil Cylinder Leaks Oil, Whether the Screws Are Loose, Whether There Are Sundries on the Mold, Whether There Are Personnel around the Running Part of the Equipment, Etc. to Ensure Safety before Starting;
2. Hydraulic Press When the Movable Beam Slides, It Is Forbidden to Put Your Hand in to Touch, and Personnel Should Stay Away from the Equipment;
3. Adjust the Working Pressure, but It Should Not Exceed 90% of the Rated Pressure of the Equipment. Test a Workpiece and Produce It after Passing the Inspection;
4. Start the Equipment to Test the Pressure, Check Whether the Pressure Reaches the Working Pressure, Whether the Equipment Is Normal and Reliable, and Whether There Is Leakage;
5. after the Cold Extrusion Molding of Aluminum Products Is Hydraulic Press, It Should Be Idle for 5 Minutes to Check Whether There Is Noise in the Oil Tank, Whether There Is Oil Leakage in Hydraulic Components and Pipelines, and Whether the Oil Is Lower than the Normal Line;
6. after the Work Is Completed in Hydraulic Press, Cut off the Power Supply, Clean the Equipment Column, Add Lubricating Oil, Clean the Mold and Workpiece, and Put Them in Order;
7. If You Need to Replace the Mold, Stop the Machine and Replace It. after the Mold Is Installed, It Should Be Manually Calibrated to Tap the Operation and Not Damage the Mold Too Quickly;
8. No Smoking, Welding and Cutting around the Cold Extrusion Molding Hydraulic Press of Aluminum Products, Inflammable and Explosive Articles Shall Not Be Stored, and Fire Prevention Measures Shall Be Taken;
9. If a Fault Occurs, Stop the Machine for Maintenance and Open the Safety Lock at the Same Time to Avoid Accidents Caused by Automatic Falling of the Oil Cylinder Or Misoperation of Personnel;
Nadun Machinery Manufacturing Co., Ltd. Specializes in Designing and Producing Various Tonnage Cold Extrusion Molding Hydraulic Press, Hydraulic Press Real Materials, Scientific and Rigorous Assembly, Stable and Durable Machine, Reasonable Price, customers Who Make Cold Extrusion Products Are Welcome to Come to the Company to Inspect and Test the Machine at Any Time.
This is the message content area, you can enter or display the message here
