Time:2023-03-31 11:07:01 Browse: 120
A. It Is to Configure Multi-Action Hydraulic Press and Mold Base on the Pressing Die of Using Simple Action Sagger Molding;
It Can Press the Powder Blank with More than 3 Steps along the Height Direction and High Density and Precision. the Precision of the Blank Is Mainly Affected by Mold Base and Pressing Die Themselves. When Demoulding, each Step of the Blank Can Be Supported by the Relevant Die Punching until the Blank Comes out of the Yin Die, Which Greatly Reduces the Risk of the Weak Section of the Blank Being Damaged;
B. It Is a Simple Configuration on the Four-Column Hydraulic Press of Multi-Action Sagging Bowl Forming Pressing Die;
Generally, Three Steps along the Height Direction with Low Density and Medium Density Can Be Pressed Economically. the Precision of the Blank in the Pressing Direction Is Directly Affected by the Elastic Movement That May Occur Throughout the Hydraulic Press.
In Terms of the Manufacture of the Hydraulic Press and Pressing Die of the Bowl Forming, the Former Only Needs Hydraulic Press of the Simple Action. Although the Structure of the Pressing Die Is Relatively Complex, the General Mold Base and Universal Mold Parts with Multiple Actions Can Be Designed, each Hydraulic Press Can Be Configured with Several Sets of General Mold Base; the Latter Pressing Die Has a Simple Structure, but Requires Multi-Action Hydraulic Press with Complex Structure, Which Is Convenient for Replacing and Repairing Pressing Die Tools, improve the Service Life of Pressing Die Tools, at the Same Time, It Is Convenient to Take Materials and Improve the Safety during Taking Materials.