Time:2023-04-03 10:51:40 Browse: 120
The tonnage of hydraulic press required for molding new energy battery box depends on the size, material and mold size of the battery box. In general, the tonnage of hydraulic press required for molding new energy battery box is between 100 tons and 300 tons.
If the battery box is small and the material is thin, the tonnage of the hydraulic press needed will be small; On the contrary, if the battery box is large and the material is thick, the tonnage of the hydraulic press needed will be large. When selecting the tonnage of hydraulic press, it should be selected according to the specific situation to ensure the quality and efficiency of molding.
The tonnage of hydraulic press needed for molding new energy battery box mainly depends on the size, shape, material and other factors of the battery box. Generally speaking, the size of the new energy battery box is relatively large, and a hydraulic press with a larger tonnage is needed.
According to the empirical data in the market, the hydraulic press of at least 100 tons or more is usually required for molding new energy battery boxes. Of course, the specific number of tons of hydraulic press needs to be calculated and evaluated according to the actual situation. If special shape, material, technological requirements and other factors are involved, it may be necessary to use a hydraulic press with larger tonnage to complete the molding process.
This is the message content area, you can enter or display the message here