Time:2023-04-22 16:00:33 Browse: 120
1. Suction Tube the Depth of the Oil Immersed Surface Is Not Enough
II. There Is Air in the Pipeline Or Pump Shell Memory
III. Foam Produced by Strong Oil Return Vortex
IV. Air Dissolved in Oil and Bubbles Generated during Work
Solution:
1. Lengthen Suction Tube, Inject Oil into the Fuel Tank to Raise Its Liquid Level
2. No-Load Operation
3. Distance between Suction Tube and Oil Return Pipe
4. Add a Partition in the Mailbox, Remove the Oil Return through the Partition, and Then Absorb It. Add Defoamer to the Oil.
This is the message content area, you can enter or display the message here
