Blog

What precautions should be taken when starting the hydraulic pump motor for a 200-ton four-column hydraulic press?

① Before starting, the pump must be filled with clean hydraulic oil through the oil return port on the pump casing, otherwise it is not allowed to start.②Turn the coupling by hand ...

2023-05-05

How to prevent the filter of the 200-ton four-column hydraulic press from being damaged?

The function of the filter plate in the 200-ton four-column hydraulic press is to filter out impurities mixed in the hydraulic oil, reduce oil pollution in the system, and ensure t...

2023-05-04

How to judge whether the filter of a 100-ton four-column hydraulic press needs to be replaced?

After installing the filter in the proper position of the 100-ton four-column hydraulic press, you can start working. Its main function is to filter the pollutants generated during...

2023-05-04

What are the precautions before refueling the 1000-ton hydraulic press?

1、Carefully check and clean the hydraulic oil tank before refueling the 1000 ton hydraulic press. After filtering the oil through a filter of 100 mesh or larger, inject it into the...

2023-05-04

The phenomenon of cylinder burning motor caused by excessive oil temperature rise of small hydraulic press

① check whether the internal leakage increases due to abrasion and strain between the plunger of the small hydraulic press pump and the hole of the cylinder body, and the joint sur...

2023-05-04

How does a 315 ton hydraulic press prevent air from entering the hydraulic system?

How does a 315 ton hydraulic press prevent air from entering the hydraulic system?a. Connect all the oil return pipes below the liquid level of the fuel tank, and cut the oil retur...

2023-04-29