Blog

What Are the Precautions When Starting the Hydraulic Pump Motor with 800 Tons Hydraulic Press?

① before Starting, Fill the Pump with Clean Hydraulic Oil through the Oil Return Port on the Pump Casing, Otherwise It Is Not Allowed to Start.② Rotate the Coupling by Hand, Check ...

2023-04-15

What should I do if the return speed of hydraulic cylinder of 315 tons hydraulic press is slow?

The hydraulic pump of the four-column hydraulic press is a quantitative pump, and the reversing valve is a two-position four-way electromagnetic reversing valve, which saves the va...

2023-04-14

What are the reasons for the abnormal flow of 400 tons hydraulic press?

1. If the oil in the hydraulic system is too dirty, impurities will accumulate and adhere to the pipe wall of the hydraulic system, thus reducing the flow area and slowing down the...

2023-04-14

How to clean up the original 315-ton hydraulic press correctly?

I. Cleaning environment selectionSince some hydraulic components are precision components, it is better to disassemble and clean the hydraulic press in the purification room. If th...

2023-04-14

What are the precautions for purchasing a 200-ton hydraulic press?

1. Does it have an independent power organization and electrical system?The 200-ton four-column hydraulic press belongs to the category of medium-sized hydraulic press. According t...

2023-04-14

630 Tons Hydraulic Press What Maintenance Should Be Carried out after the Work Is Completed?

1. the Hydraulic System Is Filled with Hydraulic Oil of Poor Quality, Which Leads to Thinning of Medium and Suspension of Impurities, Thus Causing Heating.2. Pay Attention to the O...

2023-04-13